|
Junior Series
Digital Panel Meters are ideal for general purpose
monitoring applications which require an accurate digital
display, but no control or data outputs. The standard meters
have a 3 1/2 digit LED display for readout to ±1999. A dummy
right-hand zero can be specified at the time of order for
display to ±19990. The display can be specified as red or
green. Digit height is 14.2 mm (0.56").
Very easy to
install and set up. Junior Series meters fit in a 1/8
DIN panel cutout and require a depth of only 93 mm (3.66")
behind the panel. The signal range and decimal point
position are jumper selectable. Zero and span adjustments
are via multiturn potentiometers, which are accessible from
the front. This allows adjustments to be made while the
meter remains panel mounted. To make installation and
maintenance easy and trouble-free, all electrical
connections are via detachable screw clamp connectors.
Choice of
signal conditioners. The Junior Series is available for
DC voltage and current, AC avg voltage and current, and
process signals. Six process ranges are jumper selectable:
4-20 mA, 0-1 mA, 1-5 V, 0-10 V, 0-20 mA, and 0-5 V. The
process meters also include a regulated transducer
excitation output of 10 or 24 Vdc (jumper selectable).
Reading accuracy is 0.1% of range for the DC and process
versions, and 0.25% of range for the AC versions.
Display Only.
The Junior Series is for indication only. Please go to the
Laureate Series if you require setpoint control,
analog output, or data I/O (RS-232/485 or parallel BCD).
PLEASE SEE TECHNICAL INFORMATION - PDF FOR COMPLETE
INFORMATION |