Resolution to 0.2 µs for time measurement of single events

The Laureate stopwatch meter is designed to time single events, such as sporting events or processes, which produce start and stop pulses. It can also time the width of a single pulse. Highest resolution is 0.2 µs. For long intervals, the display is updated continuously during timing.

• A-A Stopwatch Mode. Time can be measured between a start pulse and a stop pulse, both on Channel A, from either the positive or negative edges.

• A-B Stopwatch Mode. Time can also be measured between a start pulse on Channel A (positive or negative edge) and a stop pulse on Channel B (positive or negative edge). This mode allows inputs from different sources. In addition, the A and B inputs can be tied together to start the stopwatch with one polarity and stop it with the other polarity.

Timing is achieved by counting 5.5 MHz clock pulses. Laureate™ stopwatch timers use the FR dual-channel signal conditioner and Extended counter main board.

PLEASE SEE TECHNICAL INFORMATION - PDF FOR COMPLETE INFORMATION

Features:

• Times single events from 1 µs to 999,999 hrs.

• Timing resolution to 0.2 µs.

• Selectable display of single event time or accumulated time of all events.

• 6-digit red or green LED display.

• Selectable H, M or S decimal format. 

• Selectable HH.MM.SS clock format. 

• Inputs from NPN or PNP proximity switches, contact closures, digital logic, 
  magnetic pickups down to 12 mV, or AC inputs up to 250 Vac.

• Triggers on positive or negative pulse edges.

• Isolated 5, 10 or 24 Vdc excitation output to power sensors.

• Choice of isolated plug-in options for control and computer interface:
  dual relays, 4-20 mA & 0-10 V analog output, RS-232/485 I/O, parallel BCD output, low voltage AC & DC power.

• NEMA 4X, 1/8 DIN case.

• Certified to UL 3101-1, CAN/CSA-C22.2, EN 61010-1 (CE Mark).