|
INT- SOFT is
a simple Windows style user interface enabling remote
configuration of Integra parameters, and monitoring of
measured parameters. Configuration of measured parameters,
outputs, digital communications, pulsed relays, current and
power demand are easily programmed through INT-SOFT, which
can be installed on
any PC running Windows 95, NT or 2000. INT-SOFT allows the
user to load and save the configuration to and from a hard
disk on a PC, and to send and retrieve settings to and from
the Integra. Settings can be saved to disk for later use,
and can be copied from one Integra to the next.
Communication with up to 31 Integra units can be achieved
via connection to a COM port on the PC via an RS485/RS232
converter, however, INT-SOFT can only communicate with one
Integra at a time. Status information of measured parameters
will usually be communicated into a building management
system, but can also be monitored through the configuration
software. The software interrogates the selected Integra
every few seconds to obtain data, which can be viewed on a
dedicated measurements page.
PLEASE SEE TECHNICAL INFORMATION - PDF FOR COMPLETE
INFORMATION |